Where to buy 1-787-251-9474
Download product specifications

Basic Polymer Modified Thin-Set Mortar

Basic Modified Thin-Set Mortar is a dry set mortar with a good bond strength for most tile projectsBasic Modified Thin-Set Mortar is a dry set mortar with a good bond strength for most tile projectsand is recommended to be used on walls, floors and countertops installations. Meets and exceedsANSI A118.4 and A118.1 requirements. The product is also Environmentally Friendly containingrecycled and regional materials.

USES

To be used on interior or exterior surfaces such as marble, terrazzo,concrete walls and floors, masonry, existing ceramic tile, mortar bedsand surfaces that will be exposed to water and moisture.

TILE TYPES

Use Basic Polymer Modified Thin-Set Mortar in any of the followingtile types.

  • Impervious Ceramic and Porcelain Tiles
  • Glazed Wall Tile.Vitreous, semi-vitreous or absorptive tile suchas, ceramic, quarry and cement
  • Brick Tile
  • Terrazzo
  • Natural Stone
  • Tile

  • Download Product Specifications:
Basic Polymer Modified Thin-Set Mortar

Carmelo Easy Mix

CARMELO EASY MIX is a mixture of cement based concrete and aggregates for useCARMELO EASY MIX is a mixture of cement based concrete and aggregates for usein structures, slabs, foundations, footings. The aggregates are combined in controlledproportions to provide high quality product with good characteristics of mixing andplacing. It’s concrete utility combines ease mixed with excellent performance. Materialsare from local sources.

USES

For structural application and others, is a versatileproduct that can be used for construction of patio slabs,pavement repairs sidewalks, curbs, steps, ramps andwalkways, piping and footings, foundation walls andfoundation, swimming pools, bird bath, slope protection.

TECHNICAL DATA

The product meets and exceeds the physical standardsset by ASTM C387 (Standard Specifications for Packaged,Dry, Combined Materials for Mortar and Concrete) andtested under ASTM C-39 (Standard Test Method forCompressive strength of cylindrical Concrete specimens).Concrete reaches a compressive strength of 3000 psi in28 days.

  • Download Product Specifications:
Carmelo Easy Mix

Carmelo General Purpose Plaster / Mortar Mix

CARMELO General Purpose Plaster / Mortar Mix is a blend of cement, Class F fly ash,CARMELO General Purpose Plaster / Mortar Mix is a blend of cement, Class F fly ash,specially graded masonry sand and admixtures combined in carefully controlledproportions to give a product of consistent quality with good mixing, placing andfinishing characteristics. This product is a general purpose mortar that combines easeof mixing with excellent performance. The product is also Environmentally Friendlycontaining recycled materials and local regional materials with reinforced fiber.

USES

CARMELO General Purpose Plaster / Mortar Mix is a versatile productthat can be used as masonry mortar for rendering block and concretewalls, laying block or stone, stucco & plaster repair, one-coat exteriorplaster and mortar beds.

TECHNICAL DATA

The product meets and exceeds the physical property requirementsof ASTM C387 (Standard Specifications for Packaged, Dry, CombinedMaterials for Mortar and Concrete) and ASTM C270 (Mortar forMasonry Unit). Mortar Mix with fiber reaches a compressivestrength in excess of 1500 psi at 28 days. The data outlined belowis representative of typical values achievable under controlledlaboratory conditions. Results obtained in the field may vary fromthose stated.

  • Download Product Specifications:
Carmelo General Purpose Plaster / Mortar Mix

Carmelo Mix Type N

CARMELO Mix Type N is a blend of cement, specially graded masonry sand and admixtures combinedCARMELO Mix Type N is a blend of cement, specially graded masonry sand and admixtures combinedin carefully controlled proportions to give a product of consistent quality with good mixing, placingand finishing characteristics. The product is a general purpose mortar that combines ease of mixingwith excellent performance. It is also an ENVIRONMENTALLY FRIENDLY PRODUCT containing recycledmaterials and local regional materials.

USES

CARMELO Mix Type N is a versatile product that can be used asmasonry mortar for rendering block and concrete walls, layingblock or stone, stucco & plaster repair, one-coat exterior plaster andmortar beds.

TECHNICAL DATA

The product meets and exceeds the physical property requirementsof ASTM for Type N Mortars on C270 (Mortar for Unit Masonry)and ASTM C387 (Standard Specifications for Packaged, Dry,Combined Materials for Mortar and Concrete). The mortar reaches acompressive strength in excess of 1000 psi at 28 days.

  • Download Product Specifications:
Carmelo Mix Type N

Carmelo Smooth Finish

CARMELO SMOOTH FINISH is a specially formulated compound that combines ease ofCARMELO SMOOTH FINISH is a specially formulated compound that combines ease ofmixing with excellent performance. The product improve the workability of the mix whilecontributing to protect the substrate from chlorides and other detrimental salts. CARMELOSMOOTH FINISH is also Environmentally Friendly containing recycled materials and localregional materials.

USES

CARMELO SMOOTH FINISH is designed to smoothsurfaces by providing a soft texture. It can be usedto correct cosmetic flaws in precast and cast-in-placestructures by matching the smooth texture of the overallelement to be treated. If required, the product can beformulated specifically to match the color of the substrate.The product has high water retention promoting fullhydration and high bond strength to concrete andmasonry surfaces.

TECHNICAL DATA

The product reaches a compressive strength of 3000psi (20.7 MPa) at 28 days. The data outlined belowis representative of typical values achievable undercontrolled laboratory conditions. Results obtained in thefield may vary from those stated.

  • Download Product Specifications:
Carmelo Smooth Finish

ECO GROUT™ S

ECO-GROUT S is a high-quality, polymer-modified sanded, Portland cement based groutECO-GROUT S is a high-quality, polymer-modified sanded, Portland cement based groutthat requires only the addition of water.

ADVANTAGES

  • Low water absorption
  • Easy to clean
  • Highly resistant to abrasion
  • Resistant to UV rays
  • One-pack product

MULTIPLE USES

  • Use on floors, walls, countertops, ceilings, showers, poolsand spas
  • For grouting all types of ceramic tiles for both interiorsand exteriors in wet and dry conditions
  • For grouting natural stone, slate, granite, and stoneagglomerates
  • For submerged applications such as spas and swimmingpools
  • For joint widths from 1/8” to 3/4” (3 - 19 mm)

  • Download Product Specifications:
ECO GROUT™ S
[1] 2  >>