ECO GROUT™ U

ECO-GROUT U is a high-quality, polymer-modified unsanded, Portland cementECO-GROUT U is a high-quality, polymer-modified unsanded, Portland cementbased grout that requires only the addition of water.

ADVANTAGES

  • Low water absorption
  • Easy to clean
  • Highly resistant to abrasion
  • Resistant to UV rays
  • One-pack product

MULTIPLE USES

  • Use on floors, walls, countertops, ceilings, showers, poolsand spas
  • For grouting all types of ceramic tiles for both interiorsand exteriors in wet and dry conditions
  • For grouting natural stone, slate, granite, and stoneagglomerates
  • For submerged applications such as spas and swimmingpools after fully cured
  • For joint widths from 1/16” to 1/8” (1,5 - 3 mm)

  • Download Product Specifications:
ECO GROUT™ U

Floor / Wall Thin-set Mortar

Carmelo Thin-Set Mortar is a dry set mortar for tileCarmelo Thin-Set Mortar is a dry set mortar for tileinstallation on floors and walls with extraordinaryadhesion and workability properties that significantlyfacilitates and improves installation work.

USES:

To be used on concrete surfaces. For other surfacessuch as: ceramic, marble terrazzo and gypsum boardrefer to the manual published by the “Tile Council ofAmerica, Handbook for Ceramic Tile Installation”. Donot use over the following surfaces: glass, wood, metaland plastic.

Carmelo Thin-Set Mortar is a dry set mortar for tileCarmelo Thin-Set Mortar is a dry set mortar for tileinstallation on floors and walls with extraordinaryadhesion and workability properties that significantlyfacilitates and improves installation work.

USES

To be used on concrete surfaces. For other surfacessuch as: ceramic, marble terrazzo and gypsum boardrefer to the manual published by the “Tile Council ofAmerica, Handbook for Ceramic Tile Installation”. Donot use over the following surfaces: glass, wood, metaland plastic.

  • Download Product Specifications:
Floor / Wall Thin-set Mortar

Floor Thin-set Mortar

Carmelo Floor Thin-Set Mortar is a dry set mortar to be used on floors and walls,Carmelo Floor Thin-Set Mortar is a dry set mortar to be used on floors and walls,which requires only the addition of water to become a versatile setting system for tileinstallation. Meets and exceeds ANSI A118.1 requirements.

USES

To be used on surfaces such as concrete, cement mortarsand gypsum wall board. For other surfaces such asceramic, marble, and terrazzo, it is recommended to useCarmelo Polymer Modified Thin Set Mortar and refer tothe manual published by the “Tile Council of America;Handbook for Ceramic Tile Installation”.

TILE TYPES

Use Floor Thin-Set Mortar to set any of the followingtile types.- Vitreous, semi-vitreous or absorptive tile such asceramic, quarry and cement.- Brick tiles- Terrazo- Natural Stone tile

  • Download Product Specifications:
Floor Thin-set Mortar

Premium Polymer Modified Thin-set Mortar

Premium Polymer Modified Thin-Set Mortar is a dry set mortar with very good bond strength for mostPremium Polymer Modified Thin-Set Mortar is a dry set mortar with very good bond strength for mosttile projects and is recommended to be used on walls, floors and countertops installations. It meetsand exceeds ANSI A118.4 and A118.1 requirements. The product is also Environmentally Friendlycontaining recycled and regional materials.

USES

To be used on interior or exterior surfaces such as marble, terrazzo,concrete walls and floors, masonry, existing ceramic tile, mortar bedsand surfaces that will be exposed to water and moisture.

TILE TYPES

Use Polymer Modified Thin-Set Mortar to set any of the following tile types
  • Impervious ceramic and porcelain tiles
  • Glazed wall tile
  • Vitreous, semi-vitreous or absorptive tile such as,ceramic, quarry and cement
  • Brick tile
  • Terrazo
  • Natural Stone tile

  • Download Product Specifications:
Premium Polymer Modified Thin-set Mortar

Self Leveling Underlayment

Self-Leveling Mortar is a poured-in-place cement based non-structural floorSelf-Leveling Mortar is a poured-in-place cement based non-structural floorunderlayment that self-levels and cures to create a flat, hard surface on interior floorsbefore installation of any covering. It is used to level floors, correct horizontal surfacedefects, or as a follow-up to rough-screed projects. Typical applications includecommercial, industrial, and residential projects on new construction or restoration overconcrete flatwork, nonmoving wood floors, flooring with cutback resin, and other firmporous and nonporous surfaces.

ADVANTAGES

With our unique mix design, strict Quality Assurance testsand processes, Self-Leveling Underlayment Mortar offersthe following advantages:Self-levels for smooth, easy installations / highfluidity and ready to pour, reducing Installationtime / Remains workable for more than 30 minuteswith minor agitation / Not gypsum based / Singlecomponent – requires only the correct amount ofwater / Rapid curing-ready for service in 24 hours.

MULTIPLE USES

Levels rough concrete surfaces / Under tiles, carpeting,and hardwood floors / Commercial and Residentialstructures / Office Complexes / Over Cast-in-Place andprecast floors / Where quick turnaround is needed.

  • Download Product Specifications:
Self Leveling Underlayment

Structural Mortar Mix

Structural Mortar Mix is a single component Portland cement based plaster containingStructural Mortar Mix is a single component Portland cement based plaster containingadditives and reinforced with fiber for a superior bonding strength. Depending uponapplication, Structural Mortar Mix may be sprayed or hand-troweled. The product isless permeable and easy to place and finish. Packaged in 50 lb bags, Structural MortarMix is simple to use, requiring only addition of water at the jobsite.

PHYSICAL PROPERTIES

Structural Mortar Mix has a high degree of adhesion, shearand compression strength which ensures correct bonding ofpatched areas with existing structures. The durability of structuralreinforcements obtained with Structural Mortar Mix is enhanced bythe product’s high levels of resistance to sulfate attack and chlorideingression.

YIELD

A 50 lb bag will yield approximately 0.45 ft3 of mixed material.Coverage will be approximately 20 ft2 at 1/4” thickness.

  • Specially designed mix for allSpecially designed mix for alltypes of building systems.
  • High Compressive Strengthof 4000 psi
  • Less prone to cracking
  • High resistance to sulfate& carbonate attacks
  • Easy finish as basecoat
  • Environmentally friendly
  • Meets ASTM C-109 andASTM C-387 specifications

  • Download Product Specifications:
Structural Mortar Mix
<<  1 [2