For more than 60 years manufacturing quality products in Puerto Rico!

ECO GROUT™ U

ECO-GROUT U is a high-quality, polymer-modified unsanded, Portland cementECO-GROUT U is a high-quality, polymer-modified unsanded, Portland cementbased grout that requires only the addition of water.

ADVANTAGES

  • Low water absorption
  • Easy to clean
  • Highly resistant to abrasion
  • Resistant to UV rays
  • One-pack product

MULTIPLE USES

  • Use on floors, walls, countertops, ceilings, showers, poolsand spas
  • For grouting all types of ceramic tiles for both interiorsand exteriors in wet and dry conditions
  • For grouting natural stone, slate, granite, and stoneagglomerates
  • For submerged applications such as spas and swimmingpools after fully cured
  • For joint widths from 1/16” to 1/8” (1,5 - 3 mm)

**Se consiguen en sacos de 25 lbs.y de 10 lbs. 

  • Download Product Specifications:
ECO GROUT™ U ECO GROUT™ U

Carmelo General Purpose Plaster / Mortar Mix

CARMELO General Purpose Plaster / Mortar Mix is a blend of cement, Class F fly ash,CARMELO General Purpose Plaster / Mortar Mix is a blend of cement, Class F fly ash,specially graded masonry sand and admixtures combined in carefully controlledproportions to give a product of consistent quality with good mixing, placing andfinishing characteristics. This product is a general purpose mortar that combines easeof mixing with excellent performance. The product is also Environmentally Friendlycontaining recycled materials and local regional materials with reinforced fiber.

USES

CARMELO General Purpose Plaster / Mortar Mix is a versatile productthat can be used as masonry mortar for rendering block and concretewalls, laying block or stone, stucco & plaster repair, one-coat exteriorplaster and mortar beds.

TECHNICAL DATA

The product meets and exceeds the physical property requirementsof ASTM C387 (Standard Specifications for Packaged, Dry, CombinedMaterials for Mortar and Concrete) and ASTM C270 (Mortar forMasonry Unit). Mortar Mix with fiber reaches a compressivestrength in excess of 1500 psi at 28 days. The data outlined belowis representative of typical values achievable under controlledlaboratory conditions. Results obtained in the field may vary fromthose stated.

 

Also comes in 25 lbs. bags

  • Download Product Specifications:
  • Download Product Specifications 25 lbs. bag:
Carmelo General Purpose Plaster / Mortar Mix

Carmelo Easy Mix

CARMELO EASY MIX is a mixture of cement based concrete and aggregates for useCARMELO EASY MIX is a mixture of cement based concrete and aggregates for usein structures, slabs, foundations, footings. The aggregates are combined in controlledproportions to provide high quality product with good characteristics of mixing andplacing. It’s concrete utility combines ease mixed with excellent performance. Materialsare from local sources.

USES

For structural application and others, is a versatileproduct that can be used for construction of patio slabs,pavement repairs sidewalks, curbs, steps, ramps andwalkways, piping and footings, foundation walls andfoundation, swimming pools, bird bath, slope protection.

TECHNICAL DATA

The product meets and exceeds the physical standardsset by ASTM C387 (Standard Specifications for Packaged,Dry, Combined Materials for Mortar and Concrete) andtested under ASTM C-39 (Standard Test Method forCompressive strength of cylindrical Concrete specimens).Concrete reaches a compressive strength of 3000 psi in28 days.

  • Download Product Specifications:
Carmelo Easy Mix

Carmelo Mix Type N

CARMELO Mix Type N is a blend of cement, specially graded masonry sand and admixtures combinedCARMELO Mix Type N is a blend of cement, specially graded masonry sand and admixtures combinedin carefully controlled proportions to give a product of consistent quality with good mixing, placingand finishing characteristics. The product is a general purpose mortar that combines ease of mixingwith excellent performance. It is also an ENVIRONMENTALLY FRIENDLY PRODUCT containing recycledmaterials and local regional materials.

USES

CARMELO Mix Type N is a versatile product that can be used asmasonry mortar for rendering block and concrete walls, layingblock or stone, stucco & plaster repair, one-coat exterior plaster andmortar beds.

TECHNICAL DATA

The product meets and exceeds the physical property requirementsof ASTM for Type N Mortars on C270 (Mortar for Unit Masonry)and ASTM C387 (Standard Specifications for Packaged, Dry,Combined Materials for Mortar and Concrete). The mortar reaches acompressive strength in excess of 1000 psi at 28 days.

  • Download Product Specifications:
Carmelo Mix Type N

Carmelo Mix Type S

Carmelo Mortar Mix Type S is a blend of cement, specially graded masonry sand and admixtures combined in carefully controlled proportions to give a product of consistent quality with good mixing, placing and finishing characteristics. The product is a general purpose mortar that combines ease of mixing with excellent performance. It is also an ENVIRONMENTALLY FRIENDLY PRODUCT containing recycled and regional materials.

USES

Carmelo Mix Type S is a versatile product that can be used as masonry mortar for rendering block and concrete walls, laying block or stone, stucco & plaster repair, one-coat exterior plaster and mortar beds.

TECHNICAL DATA

Carmelo Mix Type S is a Portland cement based plaster that is in compliance with ASTM C-926, C-270, C-387 requirements for Type C Plaster. Typical compressive strength results obtained with Carmelo Mix Type S, when tested in accordance with ASTM C-109, are as follows: 1800 psi (12.41 MPa) at 28 days.

  • Download Product Specifications:
Carmelo Mix Type S

Structural Mortar Mix

Structural Mortar Mix is a single component Portland cement based plaster containingStructural Mortar Mix is a single component Portland cement based plaster containingadditives and reinforced with fiber for a superior bonding strength. Depending uponapplication, Structural Mortar Mix may be sprayed or hand-troweled. The product isless permeable and easy to place and finish. Packaged in 50 lb bags, Structural MortarMix is simple to use, requiring only addition of water at the jobsite.

PHYSICAL PROPERTIES

Structural Mortar Mix has a high degree of adhesion, shearand compression strength which ensures correct bonding ofpatched areas with existing structures. The durability of structuralreinforcements obtained with Structural Mortar Mix is enhanced bythe product’s high levels of resistance to sulfate attack and chlorideingression.

YIELD

A 50 lb bag will yield approximately 0.45 ft3 of mixed material.Coverage will be approximately 20 ft2 at 1/4” thickness.

  • Specially designed mix for allSpecially designed mix for alltypes of building systems.
  • High Compressive Strengthof 4000 psi
  • Less prone to cracking
  • High resistance to sulfate& carbonate attacks
  • Easy finish as basecoat
  • Environmentally friendly
  • Meets ASTM C-109 andASTM C-387 specifications

  • Download Product Specifications:
Structural Mortar Mix
<<  1 [23  >>