For more than 60 years manufacturing quality products in Puerto Rico!

Carmelo Smooth Finish

CARMELO SMOOTH FINISH is a specially formulated compound that combines ease ofCARMELO SMOOTH FINISH is a specially formulated compound that combines ease ofmixing with excellent performance. The product improve the workability of the mix whilecontributing to protect the substrate from chlorides and other detrimental salts. CARMELOSMOOTH FINISH is also Environmentally Friendly containing recycled materials and localregional materials.

USES

CARMELO SMOOTH FINISH is designed to smoothsurfaces by providing a soft texture. It can be usedto correct cosmetic flaws in precast and cast-in-placestructures by matching the smooth texture of the overallelement to be treated. If required, the product can beformulated specifically to match the color of the substrate.The product has high water retention promoting fullhydration and high bond strength to concrete andmasonry surfaces.

TECHNICAL DATA

The product reaches a compressive strength of 3000psi (20.7 MPa) at 28 days. The data outlined belowis representative of typical values achievable undercontrolled laboratory conditions. Results obtained in thefield may vary from those stated.

  • Download Product Specifications:
Carmelo Smooth Finish

Self Leveling Underlayment

Self-Leveling Mortar is a poured-in-place cement based non-structural floorSelf-Leveling Mortar is a poured-in-place cement based non-structural floorunderlayment that self-levels and cures to create a flat, hard surface on interior floorsbefore installation of any covering. It is used to level floors, correct horizontal surfacedefects, or as a follow-up to rough-screed projects. Typical applications includecommercial, industrial, and residential projects on new construction or restoration overconcrete flatwork, nonmoving wood floors, flooring with cutback resin, and other firmporous and nonporous surfaces.

ADVANTAGES

With our unique mix design, strict Quality Assurance testsand processes, Self-Leveling Underlayment Mortar offersthe following advantages:Self-levels for smooth, easy installations / highfluidity and ready to pour, reducing Installationtime / Remains workable for more than 30 minuteswith minor agitation / Not gypsum based / Singlecomponent – requires only the correct amount ofwater / Rapid curing-ready for service in 24 hours.

MULTIPLE USES

Levels rough concrete surfaces / Under tiles, carpeting,and hardwood floors / Commercial and Residentialstructures / Office Complexes / Over Cast-in-Place andprecast floors / Where quick turnaround is needed.

  • Download Product Specifications:
Self Leveling Underlayment

IMPERMEABLE MORTAR FINISH

Carmelo Impermeable Mortar Finish is a blend of cement, specially graded masonry sand and admixtures combined in carefully controlled proportions to give a product of consistent quality with good mixing, placing and finishing characteristics. The product is a high quality mortar particularly design for Waterproofing of existing structures, is a ready to use mortar (just add water), based on special cements and admixtures to provide a water and damp- proof finish that combines ease of mixing with excellent performance. It is also an Environmentally Friendly Product containing recycled materials and local regional materials.

Uses


Carmelo Impermeable Mortar Finish is a versatile product that can be used for waterproofing of foundations, underground structures, basement walls, and masonries in general, elevator shafts, and ground facing walls.

Data

The product meets and exceeds the physical property requirements of ASTM C387 (Standard Specifications for Packaged, Dry, Combined Materials for Mortar and Concrete). The mortar reaches a compressive strength in excess of 1500 psi (10.34 MPa) at 28 days using ASTM C 109.

  • Higher compressive strength at 28 days.
  • Lower water permeability.
  • Lower water absorption.
  • Visual water repellency and surface beading.
  • Higher pull-off bond strength.

  • Download Product Specifications:
IMPERMEABLE MORTAR FINISH

FS Level Mortar

Carmelo FS Level Mortar is a fast set non-structural slab mortar based on poured cement that self-levels and heals to create a flat, hard surface on the exterior flat work before the installation of any final finish. It is used to correct horizontal surface defects. Typical applications include commercial, industrial and residential projects in new construction or restoration over concrete flat works. Packaged 50 lb bags is simple to use, requiring only addition of water at the job site.
BENEFITS

With our unique mix design, strict Quality Assurance tests and processes, Carmelo FS Level Mortar offers the following advantages: Easiness of Leveling for smooth and easy installations / high fluidity and ready to pour, reducing installation time / Remain manageable for more than 25 minutes with mild agitation / Non-gypsum based / Single component: requires only the correct amount of water / Quick preparation for curing for service in 4 hours.

ADVANTAGES

  • Fast setting 2 hours
  • High compressive and bond strengths achieved
  • Reduced risk of shrinkage/thermal cracking.
  • Excellent bond to concrete
  • Recommended for slab leveling and repairs
  • Notable savings in material and labor.
  • Better adherence to the substrate.
  • Environmentally friendly — Contain local regional materials.

  • Download Product Specifications:
FS Level Mortar

Carmelo Corrosion Resistant

Carmelo Corrosion Resistance Repair Mortar is a blend of Carmelo Corrosion Resistance Repair Mortar is a blend of cement, specially graded masonry sand and admixtures combined in carefully controlled proportions to give a product of consistent quality withstood mixing, placing and finishing characteristics. This product is av technology in corrosion inhibition that can easily be applied to the surface of existing concrete to extend the service life of any reinforced concrete structure. It is also an Environmentally Friendly Product containing recycled materials and local regional materials.

USES

Carmelo Corrosion Resistance Repair Mortar is a versatile product that can be used for all steel-reinforced, pre-stressed, precast, post tensioned or marine concrete. Steel-reinforced concrete, bridges and highways exposed to corrosive environments (deicing salts and weathering), building facades and balconies. Steel-reinforced concrete in or near a marine environment, parking garages piers, piles, concrete dock structures, approach for buildings and civil engineering structures.

DATA
The product meets and exceeds the physical property requirements of ASTM C-387 (Standard Specifications for Packaged, Dry, Combined Materials for Mortar and Concrete). The mortar reaches a compressive strength in excess of 1500 psi (10.34 Mpa) at 28 days.

  • Protects against the harmful effects of corrosion even in the densest concrete.
  • Reduces the chloride ingress.
  • Non-hazardous and non-toxic.
  • Non-flammable.
  • Safe and environmentally friendly.
  • Concentrated for cost-effectiveness on all projects.
  • Protects both anodic and cathodic areas.

  • Download Product Specifications:
Carmelo Corrosion Resistant
<<  1 2 [3