For more than 60 years manufacturing quality products in Puerto Rico!

Carmelo Corrosion Resistant

Carmelo Corrosion Resistance Repair Mortar is a blend of Carmelo Corrosion Resistance Repair Mortar is a blend of cement, specially graded masonry sand and admixtures combined in carefully controlled proportions to give a product of consistent quality withstood mixing, placing and finishing characteristics. This product is av technology in corrosion inhibition that can easily be applied to the surface of existing concrete to extend the service life of any reinforced concrete structure. It is also an Environmentally Friendly Product containing recycled materials and local regional materials.

USES

Carmelo Corrosion Resistance Repair Mortar is a versatile product that can be used for all steel-reinforced, pre-stressed, precast, post tensioned or marine concrete. Steel-reinforced concrete, bridges and highways exposed to corrosive environments (deicing salts and weathering), building facades and balconies. Steel-reinforced concrete in or near a marine environment, parking garages piers, piles, concrete dock structures, approach for buildings and civil engineering structures.

DATA
The product meets and exceeds the physical property requirements of ASTM C-387 (Standard Specifications for Packaged, Dry, Combined Materials for Mortar and Concrete). The mortar reaches a compressive strength in excess of 1500 psi (10.34 Mpa) at 28 days.

  • Protects against the harmful effects of corrosion even in the densest concrete.
  • Reduces the chloride ingress.
  • Non-hazardous and non-toxic.
  • Non-flammable.
  • Safe and environmentally friendly.
  • Concentrated for cost-effectiveness on all projects.
  • Protects both anodic and cathodic areas.

  • Download Product Specifications:
Carmelo Corrosion Resistant

Carmelo Hydro Plug

Carmelo Hydro Plug is a high performance and environmentally friendly repair product specially formulated to provide a ready to use ultra-rapid setting durable plugging mortar for active water leaks in concrete and masonry. Also used as anchoring and damp-proofing system. It’s modified with high quality additives for a superior bonding strength, with or without pigment to prevent corrosion. The material expands as it cures to form a watertight seal with similar characteristics to concrete. Specifically designed to adhere, requiring only the addition of water at the jobsite.

USES

Carmelo Hydro Plug is designed to be used for repairing cracks or gaps over 1 inch (25 mm) deep on walls or floor. Other applicable uses are in basements, elevator pits, conduits, sea walls, tunnels, storm drain, foundation, docks and piers.

DATA
The product meets and exceeds the physical property requirements of ASTM C-387 (Standard Specifications for Packaged, Dry, Combined Materials for Mortar and Concrete). The mortar reaches a compressive strength in excess of 1500 psi (10.34 Mpa) at 28 days.

  • Mix only with clean water.
  • Repaired area is ready in 15 minutes.
  • Permanently joins the masonry units and concrete.
  • Does not contain or releases of Volatile Organic Compounds (VOCs).
  • High strength.
  • Prevents the propagation of existing cracks through the surface.
  • Reduce the probability of corrosion.

  • Download Product Specifications:
Carmelo Hydro Plug
<<  1 [2