Products in Bulk

This section is for contractors to purchase products that either come in bags or in bulk for their projects. By selling in bulk, contractors can order in unmarked bags or silos and limit the amount of remaining products, be more cost-effective, and help the project be more sustainable by cutting down on excessive packaging.

Products List

Product NameDescriptionPackaging & SizingColorStandards
Carmelo Mortar Mix Type N Mortar Mix for plastering projects above ground level and the installation of CMU blocks, Also designed as joint filler for architectural blocks / decorative stone with enhanced bonding characteristics.50 lbs Unmarked Bags and Bulk

Gray

ASTM C-109, ASTM C-270, ASTM C387

Carmelo Mortar Mix Type SMortar Mix for plastering projects above and below ground level and the installation of CMU blocks, Also designed as joint filler for architectural blocks / decorative stone with enhanced bonding characteristics and higher strength.50 lbs Unmarked Bags and Bulk

Gray

ASTM C-109, ASTM C-270, ASTM C387

Carmelo High Strength Bond MortarThis mortar mix is a single component hydraulic Portland cement-based mix containing additives and reinforced with fiber for a superior bonding strength. Depending upon application, High Strength Bond Mortar Mix may be machine mixed and hand troweled, making it easy to place on the job site. Packaged in 50 lbs bags, High Strength Bond Mortar Mix is simple to use, requiring only the addition of water at the jobsite.50 lbs Unmarked Bags and Bulk

Gray

ASTM C-109, ASTMC-C1583, ASTM C-882

Carmelo Mortar Mix 2500 - Type MThis mortar is a uniform mix of cement, specially graded masonry sand and admixtures combined in carefully controlled proportions. As a general purpose mortar, it is ideal for filling concrete block cells and finishes where 2500 psi strength is required.50 lbs Unmarked Bags and Bulk

Gray

ASTM C-109, ASTM C-270, ASTM C387

Grout 2000A single component, Portland cement- based product for filling concrete masonry block cores and gaps/spaces to help level out floors. It helps build and reinforce walls made of bricks, blocks or stone. It offers a strong bond to existing concrete and masonry to increase durability. Our offering is pre-blended.50 lbs Unmarked Bags and Bulk

Gray

ASTM C476, ASTM C387

Structural Mortar Mix 6000A single component, Portland cement-based plaster with additives and that is reinforced with fiber for less permeability. It can be sprayed or hand-troweled and only requires the addition of water at the jobsite. Its low heat of hydration reduces the risk of shrinkage/thermal cracking and offers a lowered rebound if used as shotcrete.50 lbs Unmarked Bags and Bulk

Gray

ASTM C-109, ASTM C-387
Topping MixA mixture of cement, special grade masonry sand, and additives combined in controlled proportions. This gives the product a consistent quality with good mixing, placement and finishing characteristics. It is used to fill-in and correct surfaces before installing any final finish.50 lbs Unmarked Bags and Bulk

Gray

ASTM C-109, ASTM C-387
Topping Mix 3000A mixture of cement, special grade masonry sand, and additives combined in carefully controlled proportions. This gives the product a consistent quality with good mixing, placement and finishing characteristics. It also meets the requirement of 3000 PSI used to fill and correct surfaces before installing the final finish.50 lbs Unmarked Bags and Bulk

Gray

ASTM C-109, ASTM C-387
Topping Mix 5000A mixture of cement, special grade masonry sand, and additives combined in carefully controlled proportions. This gives the product a consistent quality with good mixing, placement and finishing characteristics. It meets the requirement of 5000 PSI extra resistance to compression used to fill and correct surfaces before installing the final finish.50 lbs Unmarked Bags and Bulk

Gray

ASTM C-109, ASTM C-387
Easy Mix 3500 TPA mixture designed with high flowability for all concrete construction projects, that offers greater non-slip safety in areas with pedestrian traffic and prone to becoming slippery. The fiber-reinforced product is ideal for slabs, foundations and footings construction. Meets ASTM C-33 standards and achieves a compressive strength of 3500 PSI.50 lbs Unmarked Bags and Bulk

Gray

ASTM C-387, ASTM C-33
Structural Mortar Corrosion InhibitorsThis mortar is a specially graded sand mortar with additives providing a consistent quality product with good mixing, setting and finishing characteristics. This product is a 4000 psi ASTM C109 structural mortar with corrosion inhibiting technology. It can be applied to existing concrete surfaces to restore their physical integrity and extend the life of the structure.50 lbs Unmarked Bags and Bulk

Gray

ASTM C-109, ASTM C1583

Structural Mortar with Polymers

This mortar is a mixture of cement, sand, fiber and additives with polymers for improved adhesion, providing a stronger bond to the substrate. Typical applications for the product include paneling applications in commercial, industrial and residential construction projects. Use the products as a base-coat and apply it with a mortar application machine, to achieve a compressive strength of 4000 PSI.50 lbs Unmarked Bags and Bulk

Gray


ASTM C-109, ASTM C-387